Cowboy Boots Size Chart
Western boots fit differently from sneakers: they have no laces, so the instep, heel and width do all the work. Use the chart to match your foot length to a US size, compare UK and EU sizes, choose the right width letter and check calf fit — then follow the fit checklist to know whether a new pair is right before the leather breaks in.
Boot Sizing Kit
Printable boot sizing kit: men’s and women’s cowboy boot size charts (US, UK, EU, inches, cm), a foot-measuring template with a scale check, a calf measuring guide, a boot fit checklist and a family size record.
- Men’s chart (PDF/XLSX)
- Women’s chart (PDF/XLSX)
- Measuring template (PDF)
- Fit checklist (PDF, DOCX)
- Size record (PDF, XLSX)
Formats: PDF, XLSX, DOCX. Instant download after payment (link valid 72 hours, up to 5 downloads). AI-assisted: the templates were drafted with AI help and reviewed and laid out by Kedop.
$5.00 USD, one-time
Secure card checkout by Stripe. Full refund within 7 days — see the refund policy and license.
Foot length to boot size
Men’s cowboy boot size chart
| US | Foot length (in) | Foot length (cm) | UK | EU |
|---|---|---|---|---|
| 6 | 9.33 | 23.7 | 5.5 | 39 |
| 7 | 9.67 | 24.6 | 6.5 | 40 |
| 8 | 10 | 25.4 | 7.5 | 41 |
| 9 | 10.33 | 26.2 | 8.5 | 42 |
| 10 | 10.67 | 27.1 | 9.5 | 43 |
| 11 | 11 | 27.9 | 10.5 | 44 |
| 12 | 11.33 | 28.8 | 11.5 | 45 |
| 13 | 11.67 | 29.6 | 12.5 | 46 |
| 14 | 12 | 30.5 | 13.5 | 47 |
Half sizes fall between the rows (about ⅙ inch or 4 mm longer per half size). Lengths follow the standard Brannock-style scale, where each full size is ⅓ inch. UK and EU conversions are approximate — brands differ by up to a full size.
Women’s cowboy boot size chart
| US | Foot length (in) | Foot length (cm) | UK | EU |
|---|---|---|---|---|
| 5 | 8.67 | 22 | 3 | 35.5 |
| 6 | 9 | 22.9 | 4 | 36.5 |
| 7 | 9.33 | 23.7 | 5 | 37.5 |
| 8 | 9.67 | 24.6 | 6 | 38.5 |
| 9 | 10 | 25.4 | 7 | 39.5 |
| 10 | 10.33 | 26.2 | 8 | 40.5 |
| 11 | 10.67 | 27.1 | 9 | 41.5 |
Women’s US sizes run about 1.5 sizes larger in number than men’s for the same foot: a men’s 7 is roughly a women’s 8.5.
Boot widths
| Width | Men | Women |
|---|---|---|
| Narrow | B | A |
| Regular / medium | D | B (M) |
| Wide | EE (2E) | C or D |
| Extra wide | EEE (3E) | E (some brands) |
The letter describes the width of the boot relative to its length. If a boot pinches across the ball of the foot but the length is right, try the next width rather than a longer size.
How to measure your feet
- Measure late in the day, when feet are largest, wearing the socks you’ll wear with boots.
- Stand on a sheet of paper with your heel against a wall.
- Mark the tip of your longest toe; measure from the wall to the mark.
- Measure the widest part of the foot across the ball.
- Measure both feet and use the larger foot.
- Enter the length (and width) in the calculator or use the printable measuring template.
How western boots should fit
- Instep: snug, like a firm handshake — the instep holds the boot on, since there are no laces.
- Heel slip: about ¼ to ½ inch of lift is normal in new boots with stiff leather soles; it decreases as the sole flexes.
- Ball of the foot: sits at the widest part of the boot, where the sole bends.
- Toes: room to wiggle; toes should not touch the end, especially in pointed toe styles.
- Shaft: you should be able to slide a finger or two between your calf and the shaft.
Toe shape and fit
Toe shape changes how a boot feels but not usually its size. Round and square toes give the most room for toes; pointed (J or snip) toes taper beyond the foot, so the toe box extends past your toes rather than squeezing them. If you have wide feet, square and broad round toes tend to be most comfortable.
Calf fit
| Shaft | Typical calf circumference fit |
|---|---|
| Regular | up to about 14–15 in (36–38 cm) |
| Wide calf | about 15–17 in (38–43 cm) |
| Extra wide calf | 17 in (43 cm) and above |
Measure your calf at its widest point, at the height where the boot shaft will end, while seated. Shaft circumference varies by brand and size.
Worked example
A man’s foot measures 10.6 inches (26.9 cm) long and 4.2 inches wide. The length gives US 3 × 10.6 − 22 = 9.8, rounded to a US 10 (UK about 9.5, EU about 43). The width is about 0.40 of the length, which points to an EE (wide) boot. In the store, a 10 EE feels snug over the instep with a little heel slip — a good starting fit.
Breaking in new boots
Leather moulds to your foot with wear. Wear new boots around the house for short periods first, with the socks you’ll use. A boot that is painfully tight across the width won’t stretch enough; one that is loose over the instep won’t tighten. If in doubt between two sizes, try both widths before changing length.
Frequently asked questions
Do cowboy boots run big or small?
It varies by brand; many people wear about their dress-shoe size, often half a size below their sneaker size.
How much heel slip is normal in cowboy boots?
About ¼ to ½ inch in new boots, reducing as they break in.
What is a D width in boots?
The regular (medium) width for men’s boots.
How do I convert women’s to men’s boot sizes?
Subtract about 1.5: a women’s 8.5 is roughly a men’s 7.
Should cowboy boots be tight?
Snug over the instep and firm, but not painful or pressing on the toes.
Is my data stored?
No, the calculator runs in your browser.